Scheda di sicurezza
Scheda tecnicha
Questo sito Web utilizza i cookie in modo da poterle offrire la migliore esperienza utente possibile. La informazione sui cookie viene memorizzata nel suo browser ed esegue funzioni come riconoscerla quando ritorna sul nostro sito web o aiutare il nostro team a capire quali sezioni del sito web trova più interessanti e utili.
Xylose Lysine Desoxycholate Agar (XLD Agar) BAC Ph. Eur.
104,46 €
SHOW SPECIFICATIONS
- Assay ≥ 99.9%
- Assay (V/V) ≥ 96%
- Minimum calorimetry dose 15 – 18.8kGy
- Assay (dried substance) ≥ 99.0%
- Clarity of solution Passes test
- Density 0.789 – 0.791g/ml
- Density at 20°C 0.844 – 0.854g/cm 3
- Free acidity ≤ 0.04meq/g
- Sodium carbonate (Na2CO3) ≤ 0.5%
- Substances not precipited by diluted H2SO4 ≤ 0.1%
- Appearance Reddish-orange
- Colour (Hazen) ≤ 5
- Composition 70% isopropyl alcohol, water%
- Iron (Fe) ≤ 0.01%
- Identification A Conforms
- Substances insoluble in water (H2O) ≤ 0.003%
- Odour alcohol
- Min. dose ≥ 25kGy
- Boiling point ≥ 78ºC
- Acidity ≤ 0.0010%
- Appearance of solution Clear and colourness
- Chloride (Cl–) ≤ 0.0001%
- pH (25°C) 7.2 – 7.6
- Silver (Ag) ≥ 63.4%
- Solubility in water (H2O) Completely soluble
- Solubility in water (H2O) (20°C) Totally soluble
- Sodium sulfate (Na2SO4) ≤ 0.012%
- Aldehydes ≤ 0.001%
- Arsenic (As) ≤ 0.0001%
- Residue on roasting (SO4) ≤ 0.05%
- Concentration of use 55.2g/L
- Flash point ≥ 21
- pH 3.8 – 6
- pH (10%; water) 3 – 5
- Copper (Cu) ≤ 0.0001%
- Water (H2O) ≤ 0.05%
- Methanol (CH3OH) ≤ 0.001%
- Manganese (Mn) ≤ 0.00005%
- Sodium chloride (NaCl) ≤ 0.01%
- Ammonium (NH4) ≤ 0.2%
- Mercury (Hg) ≤ 0.00001%
- Phosphate (PO4) ≤ 0.002%
- Residue on evaporation ≤ 0.0025%
- Residue on ignition ≤ 0.05%
- Heavy metals (Pb) ≤ 0.002%
- Nickel (Ni) ≤ 0.001%
- Sulfates (SO4) ≤ 0.01%
- Absence of benzene passes test
- Esters ≤ 0.0020%
- Organic substances passes test
- Loss on drying ≤ 0.2%
- Calcium (Ca) ≤ 0.004%
- Higher alcohols ≤ 0.025%
- Iron III (Fe (III)) ≤ 0.001%
- Nitrites (NO2) ≤ 0.0002%
- Storage temperature 2 – 25°C
- UV-Absorbance Maximum limit (240 nm) ≤ 0.4
- Magnesium (Mg) ≤ 0.0025%
- Lead (Pb) ≤ 0.0002%
- UV-Absorbance Maximum limit (240 nm) ≤ 0.4
- UV-Absorbance Maximum limit (250-260 nm) ≤ 0.3
- UV-Absorbance Maximum limit (270-340 nm) ≤ 0.1
- Substances not precipited by HCl ≤ 0.01%
| prezzo | stock disponibile | quantità |
|---|
Descrizione
SHOW SPECIFICATIONS
- Assay ≥ 99.9%
- Assay (V/V) ≥ 96%
- Minimum calorimetry dose 15 – 18.8kGy
- Assay (dried substance) ≥ 99.0%
- Clarity of solution Passes test
- Density 0.789 – 0.791g/ml
- Density at 20°C 0.844 – 0.854g/cm 3
- Free acidity ≤ 0.04meq/g
- Sodium carbonate (Na2CO3) ≤ 0.5%
- Substances not precipited by diluted H2SO4 ≤ 0.1%
- Appearance Reddish-orange
- Colour (Hazen) ≤ 5
- Composition 70% isopropyl alcohol, water%
- Iron (Fe) ≤ 0.01%
- Identification A Conforms
- Substances insoluble in water (H2O) ≤ 0.003%
- Odour alcohol
- Min. dose ≥ 25kGy
- Boiling point ≥ 78ºC
- Acidity ≤ 0.0010%
- Appearance of solution Clear and colourness
- Chloride (Cl–) ≤ 0.0001%
- pH (25°C) 7.2 – 7.6
- Silver (Ag) ≥ 63.4%
- Solubility in water (H2O) Completely soluble
- Solubility in water (H2O) (20°C) Totally soluble
- Sodium sulfate (Na2SO4) ≤ 0.012%
- Aldehydes ≤ 0.001%
- Arsenic (As) ≤ 0.0001%
- Residue on roasting (SO4) ≤ 0.05%
- Concentration of use 55.2g/L
- Flash point ≥ 21
- pH 3.8 – 6
- pH (10%; water) 3 – 5
- Copper (Cu) ≤ 0.0001%
- Water (H2O) ≤ 0.05%
- Methanol (CH3OH) ≤ 0.001%
- Manganese (Mn) ≤ 0.00005%
- Sodium chloride (NaCl) ≤ 0.01%
- Ammonium (NH4) ≤ 0.2%
- Mercury (Hg) ≤ 0.00001%
- Phosphate (PO4) ≤ 0.002%
- Residue on evaporation ≤ 0.0025%
- Residue on ignition ≤ 0.05%
- Heavy metals (Pb) ≤ 0.002%
- Nickel (Ni) ≤ 0.001%
- Sulfates (SO4) ≤ 0.01%
- Absence of benzene passes test
- Esters ≤ 0.0020%
- Organic substances passes test
- Loss on drying ≤ 0.2%
- Calcium (Ca) ≤ 0.004%
- Higher alcohols ≤ 0.025%
- Iron III (Fe (III)) ≤ 0.001%
- Nitrites (NO2) ≤ 0.0002%
- Storage temperature 2 – 25°C
- UV-Absorbance Maximum limit (240 nm) ≤ 0.4
- Magnesium (Mg) ≤ 0.0025%
- Lead (Pb) ≤ 0.0002%
- UV-Absorbance Maximum limit (240 nm) ≤ 0.4
- UV-Absorbance Maximum limit (250-260 nm) ≤ 0.3
- UV-Absorbance Maximum limit (270-340 nm) ≤ 0.1
- Substances not precipited by HCl ≤ 0.01%